How can I remove or replace the USB-C cables on the Adapt charging station?

To remove or replace cables, follow these steps:

1. Each locking cable bracket or bar is secured using two screws. The Adapt4 and Adapt6 have one bracket each, while the Adapt12 has two bars (see diagram). These must be loosened or removed to access the cables.
   • Adapt4 & Adapt6: Unfasten the screws on the cable bracket using the supplied box wrench.
   • Adapt12: Unfasten the screws on the cable bars using the supplied T10H Torx key, or use your hand if your model has thumb screws.
2. Disconnect each cable from its USB-C port and route it through the cable track for removal.
3. To replace a cable, simply reverse the process.

Adapt4 & Adapt6	Adapt12